EN
V200
2011-01
Page 20
3.7 Adjusting the arm support
The arm support of your wheelchair can be adjustable in height and depth. The height of the
arm support can be adjusted in 3 positions.
Height armsupport to seat Number of the blocks
under the tube
Number of blocks between
tube and armrests
220 mm (8.66 in.) (Standard)
2
1
230 mm (9.06 in.)
1
2
240 mm (9.45 in.)
0
3
Table 4: Height of arm support
The depth of the armrest can be adjusted in 3 positions.
Depth of the armrest
Used holes
Front position
Back and middle
Middle position (Standard)
Hole 2 and 4
Back position
Front and middle
Table 5: Depth of armrest
Adjust the height and the depth of the armrest as follow:
1.
Remove both screws under the armrest.
2.
Place the correct number of blocks under and above the tubes, see table 4.
3.
Install the armrest with the required holes for depth adjustment.
4
Maintenance
The expected lifetime of this wheelchair amounts 8 years. Lifetime of the wheelchair is
influenced by its use, storage, regular maintenance, servicing and cleaning.
4.1 Regular Maintenance
The maintenance activities to ensure a good condition for your Vermeiren wheelchair are
described below:
Before every ride
Check the tyres and make them clean. If necessary change the tire.
Check screw fastenings are secured.
Check the brakes and adjusted if necessary.
Check the wheelchair (cleanliness, cracks, damage on structural parts ... .)
and make it clean. If necessary change the coating.
