V300 XL
2013-11
Page 14
3
Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren V300 XL has been designed to be adjust with a minimum of replacements
parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
L
L
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
L
L
L
WARNING:
Variation of allowed adjustments van still change the stability of your
wheelchair (tilt back or sideways).
3.1 Tools
•
Wrench set n° 7 to n° 22
•
Allen keyset n° 3 to n° 8
•
Screwdriver n° 4 to n° 5
•
Screwdriver Phillips head
3.2 Manner of delivery
The Vermeiren V300 XL shall be delivered with:
•
1 frame with armrests, rear and front wheels (standard delivery
seat height: 500 mm, seat angle: 5°)
•
1 pair footrests
•
Tools
•
Manual
•
Accessories
3.3 Adjusting the seat height and seat angle
The Vermeiren V300 XL is adjustable in 4 seat heights and 5 seat angles (0°-2,5°-5°-7,5°-
10°) by changing the position of the wheels for eac h height and angle there is a different
setting of the front and rear wheels.
The summary of the different seat heights by a standard seat angle 5° is tabulated below.
Seat height
Rear wheels
Front wheels
Hole
Hole
Bushing
Ⓑ
Ⓑ
Ⓑ
Ⓑ
relative to castor
stem housing
Ⓒ
Ⓒ
Ⓒ
Ⓒ
440 mm
Above
470 mm
Under
500 mm
(Standard)
Under
530 mm
Under
Table 2: Seat heights by seat angle 5°
Summary of Contents for V300 XL
Page 158: ......