70
Sending arpeggios via MIDI
Arpeggios and sequences can be output as MIDI notes via the
MIDI OUT
output. For doing so, you
need to activate EDIT parameter
[5] SEND ARP/SEQ. Carry out the following steps to do so:
1. Make sure, the ’14 Analogsynthesizer is in standard play-mode (
ARPEGGIATOR
switch
i
set to
OFF
).
2. Enter the edit mode by pressing the
[EDIT]
button – the corresponding LED will be lit.
3. Use the
select dial to select the EDIT parameter
[5] SEND ARP/SEQ
.
4. Pressing the
VALUE
button activates or deactivates the sending of arpeggio- and sequence-
data via MIDI (activated if
VALUE
LED lit, deactivated if
VALUE
LED unlit).
5. Exit EDIT mode by pressing the
[EDIT]
button again.
