MIX
controls the mixture between the noise part and the multiple, detuned oscillators.
Turned fully counterclockwise, only the noise component will be audible, turned
fully clockwise, only the oscillator mixture will be audible, allowing for more
“authentic” sounds, due to the metallic sound.
PITCH
defines the pitch/frequency of the oscillator mix as well as for the
ATTACK
impulse.
☛
HI HAT 1
and
HI HAT 2
can be triggered in two versions, using the
TRIG
button
②
- either as cymbal/open hi-hat or as closed hi-hat. The closed hi-
hat has a fixed, short decay time, independent of the
DECAY
control. After
switching on the DRM1 MKIII, the
TRIG
button
②
defaults to trigger the
cymbal/open hi-hat, with the sound’s length being defined by
DECAY
. To
toggle the trigger-modes, press and hold
TRIG
②
for approx. two seconds.
The corresponding LED will light up shortly to confirm the operation.
By using MIDI, both sounds of these instrument channels, cymbal/open hi-hat
and closed hi-hat, can be played by different MIDI notes. Here, the dependency
between the two sounds on one channel is automatically reflected (see "MIDI
Functions" on page 18).
16
