User Guide fourMulator
12
Control elements of the clock-generator
C
The clock-generator
C
allows synchronizing fourMulator to other clock-dependent modules, such as step-
sequencers. fourMulator can either work as beat reference or follow an external reference in sync.
TAP button
i
Use this button to set the tempo for fourMulator’s internal clock. A tempo change will occur after tapping the
button four times. For predictable results, tap in a constant rhythm.
Clock output (CLK OUT)
o
This jack outputs the clock signal. It can be connected to modules such as step-sequencers, clock dividers or
sequential switches.
Clock input (CLK IN)
a
This jack allows feeding an external clock signal into the fourMulator. With this input being used, the internal
clock is automatically disconnected from the Modulators. By setting the
SYNC
switch
e
to
CLK, the external
clock will be used.
H
The internal clock remains and is still present on the
CLK OUT
o
jack. By removing the
cable from
CLK IN
a
, the internal clock regains control using the previous tempo. This
tempo setting will only be lost when switching off or powering down the system.
Summary of Contents for fourMulator
Page 1: ...User Guide fourMulator...
