User Guide uniCYCLE
2
Unpacking
To ensure top quality, we carefully checked the uniCYCLE module before packaging. Nevertheless, we cannot
fully exclude damage during transportation. Therefore, we kindly ask you to inspect uniCYCLE by yourself, once
you receive the module. In case there is anything unusual about the unit or its packaging, do not hesitate to
contact you dealer or us, to solve the problem.
You should find the following items in the box:
-
the uniCYCLE module
-
one 16-pole ribbon-cable
-
four M-type screws 3 x 6 mm with matching plastic washers
-
this operating manual
☛
You probably are curious about the sound and possibilities of your uniCYCLE. However,
we recommend you to completely read this manual before trying out the module.
The jumpers on the module’s rear (see "Jumper" on page 11) can only be accessed with the
module not being installed in a frame. It’s worth, knowing their functions in before to set
them up for your needs.
