29
20306755
30ILDV Series Gas Fireplace Insert
CLEANING AND MAINTENANCE
Make sure the gas valve knob is in the “OFF” position.
Wait at least five (5) minutes before start ing maintenance.
VENTING SYSTEM
A qualified agency should examine the venting system
annually.
CLEANING GLASS
Clean the ceramic glass periodically. Condensation will
sometimes form on the glass during a cold startup. This is
normal for all gas fireplaces and inserts. This condensation
often attracts dust and lint to the surface of the glass. The
initial paint curing of the appliance can also leave a slight
film on the glass. This is a temporary problem.
CLEANING and MAINTENANCE
LG535
ILDV log flame
9/08
Figure 31 -
Typical Burner Flame
LG535
FP1943
pilot flame
Thermocouple
Thermopile
FP1943
Figure 32 -
Typical Pilot Flame
You should clean the glass after the first two weeks of use.
After that, you should clean the glass no more than two or
three times a season. Use a mild glass cleaner to clean
the door. Do not use abrasive cleaners. They will damage
the glass surface.
PILOT AND BURNER FLAMES
Visually check pilot and burner flames periodically.
Refer
to Figure 31
for typical burner flame.
Refer to Figure 32
for typical pilot flame.