Vermont Castings • Encore Model 2040-CAT-C Installation Manual_R3 • 2019 - ___ • 09/20
4
8390-204i
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
For assistance or additional information, consult a qualified
installer, service agency or your dealer.
Hearth & Home Technologies WILL NOT warranty
appliances that exhibit evidence of over-firing. Evidence of
over-firing includes, but is not limited to:
• Warped Damper
• Deteriorated refractory
• Deteriorated interior components
E. Non-Combustible Materials
Material which will not ignite and burn, composed of any
combination of the following:
- Steel
- Plaster
- Brick
- Iron
- Concrete
- Tile
- Glass
- Slate
Materials reported as passing
ASTM E 136, Standard
Test Method for Behavior of Metals, in a Vertical Tube
Furnace of 750° C.
F. Combustible Materials
Material made of/or surfaced with any of the following
materials:
- Wood
- Compressed Paper
- Plant Fibers
- Plastic
- Plywood/OSB
- Sheet Rock (drywall)
Any material that can ignite and burn: flame proofed or not,
plastered or non-plastered.
NOTE: This installation must conform with local codes.
In the absence of local codes you must comply with the
UL1482-11, UL 737-11, (UM) 84-HUD and NPFA211 in
the U.S.A. and the ULC S627-00 and CAN/CSA-B365
Installation Codes in Canada.
NOT APPROVED FOR
MOBILE HOME INSTALLATIONS IN CANADA!
NOTE: Hearth & Home Technologies, manufacturer of this
appliance, reserves the right to alter its products, their
specifications and/or price without notice.
!
WARNING
This product and the fuels used to operate this product
(wood), and the products of combustion of such fuels, can
expose you to chemicals including carbon black, which
is known to the State of California to cause cancer, and
carbon monoxide, which is know to the State of California
to cause birth defects or other reproductive harm. For
more information go to: www.P65Warnings.ca.gov
G. California
