background image

1

01/22

7102-803A

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation. 

OWNER: Retain this manual for future reference. 

Contact your dealer with questions on installation, operation, or service. 

Installation and service of this appliance should be performed by 

qualified personnel. Hearth & Home Technologies recommends 

HHT Factory Trained or NFI certified professionals.

GIFFORD WOOD INSERT

MODEL NUMBERS:

GIFFORD-CB

 GIFFORD-BM

NOTE:

 To obtain a French translation of this manual, please 

contact your dealer or visit www.vermontcastings.com

REMARQUE :

 Pour obtenir une traduction française de 

ce manuel, s’il vous plaît contacter votre revendeur ou 

visitez www.vermontcastings.com

•  Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance.

•  Do not over fire - If heater or chimney connector glows, 

you are over firing. Over firing will void your warranty.

•  Comply with all minimum clearances to combustibles 

as specified.

Failure to comply may cause house fire.

If the information in these instructions 

is  not  followed  exactly,  a  fire  may  result 

causing property damage, personal injury, 

or death. 

WARNING

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down.

WARNING

Hot glass and appliance will cause burns.

•  Do not touch glass until it is cooled

•  Use leather gloves when reloading fuel

•  NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY  SUPERVISE  children  in  same  room 

as appliance.

• Alert children and adults to hazards of 

high temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

• Keep clothing, furniture, draperies and other 

flammable materials away.

Fire Risk.

For use with solid wood fuel only.

Other  fuels  may  over  fire  and  generate 

poisonous gases (i.e. carbon monoxide).

WARNING

Summary of Contents for GIFFORD-BM































Reviews: