6
Vermont Castings GPF
Installation of GPF in Optional Villa Base
The Villa Base is designed as a decorative enhance-
ment for use with the Gas Patio Fire.
Tools required: 7/16”, 3/4” and 11/16” wrenches, phillips
screwdriver.
Installation Instructions
1. Remove octagonal plate from shipping carton.
2. Remove base/Villa from shipping carton. Remove
four (4) 1/4-20 fasteners, four (4) nuts and eight (8)
washers that fasten the base to the Villa. Remove base.
Remove two (2) 1/4-20 x 1/2” fasteners, two (2) wash-
ers from cast valve panel. Set hardware aside. (Fig. 4)
