3
Merrimack Large Insert
30004671
Specifications
Merrimack Large Insert
EPA Emissions Rating .......................................3.6 g/hr
Range of heat output*.............. 10,750 - 31,780 BTU/hr
Maximum heat output** ..........................55,000 BTU/hr
Area heated*** ................................... up to ,000 sq. ft.
Size of wood splits .......................... up to ” (560 mm)
Fuel Capacity.......................................... 40 lbs. (18 kg)
Loading ..................................................................Front
Flue size .................................................... 6” (150 mm)
Fireplace Insert weight ....................... 480 lbs. (18 kg)
Primary Air Control ............................................ Manual
Glass panel.......................... High-temperature ceramic
Flue exit position...................................................... Top
Blower rating...............................150 cfm. (115V, 60Hz)
Power Cord Length................... 6 foot useable installed
*Under specific test conditions used during EPA emis-
sions standard testing.
**This value can vary depending on how the unit is
operated, and the type and moisture content of the fuel
used. The figure shown is based on maximum fuel con-
sumption obtained under laboratory conditions and with
average efficiencies.
***These values are based on operation in building-
code conforming homes under typical winter climate
conditions in New England. If your home is of nonstan-
dard construction (e.g. unusually well insulated, not in-
sulated, built under ground, etc.) or if you live in a more
severe or more temperate climate, these figures may
not apply. Since so many variables affect performance,
consult your Vermont Castings’ Authorized Dealer to
determine realistic expectations for your home.
Fig. 1
Merrimack Large Insert dimensions.
29
56
” (740 mm)
24
6M
” (629 mm)
12
6QE
”
(313 mm)
26
6QE
”
(668 mm)
17
556QE
” (449 mm)
23
56QE
”
(605 mm)
4671
Merrimack dims
7
6QE
”
(183 mm)
31
56O
" (800 mm)
25
6
” (645 mm)
