Vermont Castings OD30CFLN/P, Installation And Operation Instructions For

7

20004180

Grate Placement

Grate Assembly

1.  Place the grate steps onto the back of the 
grate as shown in Figure 7.
2.  Place grate assembly over top of burner so 
that the front two middle legs of grate are resting 
against the front portion of the main burner area. 
(Fig. 7)
3.  If the retaining bracket on the rear bottom feet 
of the grate were removed for pan installation, 
replace them now.

Add Pan Material

1.  With burner pan and grate in place, open the 
bag of lava rock and spread it evenly across the 
pan assembly to the top of the pan assembly. (Fig. 
8)
2.  Open one bag of glowing embers and place 
evenly across burner covering lava rock. (Fig. 9) 
3.  Slide the mesh screen under the grate, but on 
top of glowing embers so the mesh piece covers 
the burner pan material. (Fig. 10)
4.  Open remaining bag of embers and place 
evenly on top of mesh screen. (Fig. 10)
5.  Spread lava rock onto fireplace hearth around 
the burner pan for decorative purposes. (Fig. 11)

FP1146

OD30 embers

8/13/01  djt

Glowing Embers

FP1146

Fig. 9

  Ember placement.

FP1148

OD30 

final grate

8/13/01  djt

FP1148

Fig. 11

  Place lava rock on fireplace hearth for decoration.

Lava Rock

FP1145

OD30 lava rock

8/13/01  djt

Lava Rock

FP1145

Fig. 8  

Lava rock placement.

Pan 

Assembly

FP1147

OD30 

Screen & embers

8/13/01  djt

Ember Screen

Embers

FP1147

Fig. 10 

 Screen and ember placement.

FP1144

Grate Assy

8/13/01  djt

Grate Steps

Grate

(ODSHR42, 

20002230)

Main 

Burner

Front 

Ember Pan

FP1144

Fig. 7 

 Grate assembly.