20300293
29
Resolution Direct Vent Gas Fireplace
LOG pLaceMent
LOG pLaceMent
Burner Grate Assembly
LG753
VHLDV burner grate
LG753
LG754
VHLDV right log #1
LG754
Log #1
LG755
Left front log #2
Log #2
LG755
1. Hold Log #1 with the flat side of the log
parallel to the right brick. Place the log on
the pin on the right rear of the log bracket.
Make sure to fit the notch in the front of
the log over the fettle. There should be a
slight gap (approximately 3/8") between
the log and the brick.
2. Hold Log #2 in your left hand
with the thick end to the left.
Position the log on the left front
just behind the fettle and seat
the log on the two (2) pins on the
left fettle bracket. The right end
of the log should rest along the
back edge of the front burner.
Figure 38
Figure 37
Figure 36