Windsor High Efficiency
Wood Stove
Model WR247001
Owner’s Manual
SafEty NOticE: if tHiS appliaNcE iS NOt pROpERly iNStallEd, OpERatEd aNd MaiN-
taiNEd, a HOuSE fiRE May RESult.
tO REducE tHE RiSk Of fiRE, fOllOW tHE iNStallatiON iNStRuctiONS. failuRE tO
fOllOW iNStRuctiONS May RESult iN pROpERty daMagE, bOdily iNjuRy OR EvEN
dEatH. cONtact lOcal buildiNg OfficialS abOut REStRictiONS aNd iNStallatiON
iNSpEctiON REquiREMENtS iN yOuR aREa.
This stove is listed by OMNI-Test Laboratories of Portland,
Oregon to meet UL1482 for the US and ULC-627 for
Canada
do Not discard this Manual: Retain for future use
6” flue required
30005125 4/13 Rev. 5
This manual describes the installation and operation of the Model WR247001 non-catalytic wood heater.
This heater meets US Environmental Protection Agency’s emission limits for wood heaters. Under specific
conditions this heater has been shown to deliver heat at rates ranging from 11,492 to 18,920 BTU/hr.
for Residential Outside air and Mobile Home installation
in the uS and canada
