17
SEMI-AUTOMATIC COOKING
This is used to automatically switch off the oven after the desired cooking time has
elapsed.
There are two ways to set your oven:
1. Set the length of the cooking time by pushing the
button and the
button to
advance, or to go backwards if you have passed the desired time (fig. 4.7).
or
2. Set the end of the cooking time by pushing the
button and the button to advance,
or to go backwards if you have passed the desired time (fig. 4.8).
AUTO
and the symbol will be on.
Then set the temperature and the cooking programme using the oven switch and
thermostat knobs (see specific chapters).
The oven is switched on and it will be switched off automatically at the end of the
desired time.
During cooking, the
symbol remains on and by pressing the button
you can
see the time that remains till the end of the cooking.
At the end of cooking, the oven and the symbol will turn off, the
AUTO
will flash and
a buzzer will sound; that can be stopped by pushing any of the buttons (not or ).
Turn the switch and thermostat knobs to zero and put the programmer onto “manual” by
pressing the button.
Attention:
A power cut makes the clock go to zero and cancels the set programmes.
After a powercut, “
12:00
” will flash on the panel.
The cooking program may be cancelled at any time by pushing
.
In this case the oven shall be switched off manually.
4
Fig. 4.8
Fig. 4.7
