19
Fig. 5.1
VITROCERAMIC SURFACE
Before cleaning the top, make sure that it is switched off.
Remove any encrustation using a special scraper which can be bought (fig. 5.1).
Remove dust using a damp cloth.
Detergents can be used as long as they are not abrasive or corrosive.
All residues of detergent must be eliminated with a damp cloth.
Keep all objects that could be melted by the heat away from the top: plastic objects,
aluminium foil, sugar or sugary products.
If an object melts on the top, remove immediately (while the top is still hot) using a
special scraper to avoid permanent damage to the pyroceram surface.
Avoid using knives and pointed objects as they could damage the surface of the top.
Also avoid using abrasive sponges or wire wool which can permanently scratch the
pyroceram surface.
ATTENTION: MOST IMPORTANT!
If cleaning the glass ceramic hob using a special scraper tool take extra care to
avoid damaging to the seal at the edges of the glass ceramic surface.
5
OVEN ACCESSORIES INSTALLATION AND REMOVAL
•
Hang up the wire racks “
G
” on the oven walls (fig. 5.2).
•
Slide in, on the guides, the shelves (fig. 5.3). Do not use the first step from the top.
The rack must be fitted so that the safety catch, which stops it sliding out, faces the
inside of the oven.
•
Position the broiling pan above the oven shelf (see page 14).
•
To dismantle, operate in reverse order.
Fig. 5.2
G
Safety catch
Do not use this step
Fig. 5.3
