20
To connect the host PC to the Console port, a RJ45 (male) connector-to-RS232 DB9 (female)
connector cable is required. The RJ45 connector of the cable is connected to the Console port of
VX-IGP-1204F; the DB9 connector of the cable is connected to the PC COM port. The pin assignment
of the Console cable is shown below:
SYSTEM RESET
The Reset button is provided to reboot the system without the need to remove power. Under normal
circumstances, you will not have to use it. However, or rare occasions, the VX-IGP-1204F may not
respond; then you may need to push the Reset button.
Reset Button
Summary of Contents for VX-IGP-1204F
