Quick Start Guide
– 2 –
Verify Device is Powered On
1.
Verify the device is powered on by checking the Power LED.
When operating normally, the Power LED should be on green.
Connect Network Cables
1.
For the RJ-45 ports, connect Category 5e or better twisted-pair
cable to the 1000BASE-T ports, and Category 6, 6a, or 7 to the
10GBASE-T ports.
2.
First install SFP/SFP+ transceivers and then connect fiber optic
cabling to the transceiver ports.
The following Finisar transceivers are supported in the SFP+
ports:
■
10GBASE-SR
■
10GBASE-LR
■
1000BASE-SX
■
1000BASE-LX
3.
As connections are made, check the port status LEDs to be sure
the links are valid.
Specifications
5
1
6
1
2
3
Form Factor
1 RU rackmount
Dimensions
(W x D x H):
438 x 380 x 43.7 mm (17.24 x 14.96 x 1.72 in.)
Weight
CSG1300: 9.0 kg (19.8 lb), with two installed PSUs
CSG1500: 9.5 kg (20.9 lb), with two installed PSUs
CPU
CSG1300: Intel® Atom™ Processor C3958,
2.0 GHz, supports 16 cores
CSG1500: Intel® Xeon™ Processor D2177NT,
1.9 GHz, supports 14 cores
Memory
CSG1300:
◆
2 x 32GB DDR4-2400 ECC DRAM
◆
2 x 16MB SPI flash
CSG1500:
◆
2 x 32GB DDR4-2400 ECC DRAM
◆
2 x 32MB SPI flash
Local Storage
CSG1300:
◆
1 x M.2 SATA 3 SSD, 16GB
◆
1 x M.2 SATA 3 SSD, 128GB
CSG1500:
◆
1 x M.2 SATA 3 SSD, 16GB
◆
1 x M.2 SATA 3 SSD, 256GB
I/O Interfaces 1 x RJ-45 1G Ethernet
2 x USB 2.0 Type A
1 x RJ-45 serial console
1 x SIM card slot (supports 2 SIM cards)
WAN
Interfaces
2 x SFP+ 10GbE ports
2 x RJ-45 10GbE ports
LAN Interfaces 4 x SFP+ 10GbE ports
8 x RJ-45 1GbE PoE (30W) ports
Wireless
Interfaces
2 x LTE
2 x Wi-Fi
Bluetooth
Expansion
1 x slot (module not supplied)
Power Supply
Unit Rating
Input: AC 110V to 240V @ 50/60 Hz
Type: 920 W front-to-back airflow
PoE Power
Budget
240 W
System
Cooling
3+1 front-to-back redundant fans
Temperature
Operating: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -40 °C to 70 °C (-40 °F to 158 °F)
Humidity
Operating: 10% to 85% (non-condensing)
Storage: 5% to 90% (non-condensing)
Altitude
0 to 914 m (0 to 3000 ft)
Compliances
FCC
CE
Canada
Australia/New Zealand
VCCI (Japan)
RoHS 2.0
Safety
UL (CSA 22.2 No 62368-1 & UL62368-1)
CB (IEC/EN60950-1 & IEC/EN 62368-1)
