Important Notes:
•
Please seek professional installation if you are not
comfortable installing yourself.
•
Under no circumstances should person/s or animal be
allowed in watercraft whether loading, or in stored position.
•
Do not add additional gear, etc. that may subject the
watercraft to be over the maximum weight capacity.
•
Rinse with freshwater after each use, as saltwater and other
contaminants can cause staining, even though we use the
most corrosion resistant materials. A periodic thin coat of
corrosion proof spray can also help protect the metal parts.
•
Not intended for use in extreme conditions (ie: high forces
from water, wind, etc)
•
Not following any of the above may result in damage, loss
and/or serious injury
•
Please visit
www.versachock.com/installation-tips/
to check
for other tips.
Using Your Winch Kit
1.Winch can be located on top or on back of main support arms by
removing bolts.
2. Insert support tube through 3. Insert support tube through
support arms davit arms/insert hitch pins
to keep tube from slipping out
Get Familiar With Your Winch Kit
(please see winch owners manual for
More information on winch)
Winch ratchet arm
5. Extend strap under dinghy, then 6. Use ratchet arm to assist loading
around top of dinghy and attach dinghy onto davits
strap to dinghy rope (or D-ring if *Note: some manual assistance is
equipped) typically required to load dinghy
*Note: attaching strap to side
closest to boat, allows for easy
attaching and removal of strap
without having to reach over dinghy
7. Tilt davits down, then reinsert hitch pins/lynch pins in each davit
8. Install tie downs
Strap
Winch
Hitch Pins
Support tube
* Please refer to tilting davit owner's manual for davit instructions
