07-02083A 200-230V, 200H-230V, 500-230V, 500H-230V, 1200-230V
2
VersaClean
GROUNDING INSTRUCTIONS
This unit’s plug must be inserted into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING! Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlets
are properly grounded. Do not modify the plug
provided with the appliance – if the plug does not fit
the outlets, have proper outlets installed by a
qualified electrician.
This equipment is for use on circuits with a nominal
rating of no more than 230V.
Handle the unit carefully
Always operate the unit on a stable, level surface. Do
not drop, throw, or place where it could fall. Rough
treatment can damage the unit, and may create a
hazardous condition or void the warranty.
This unit intended for household and commercial use.
CONTROLS
ON THE CONTROL PANEL (see Fig. 3)
Includes rocker-type switches control blower, solution
pump, and heat (on select models). Heated units are
equipped with a second power cord. The second power
cord must be plugged in to a separate electric power
source.
Pressure regulator
(Fig. 2, F)
.
Select models. Turn
clockwise to increase solution pressure; turn
counterclockwise to decrease solution pressure.
Pumpout switch
(Fig. 2, E) Select models. Switch to on
position to activate pumpout.
OPERATING INSTRUCTIONS
1. Pre-mix cleaning solution with hot water in a
separate container. Pour mixed solution into the
solution tank of the machine.
A
D
B
G
C
F
H
E
FIG. 2: Rear View
(Detail)
A
I
J
A Solution tank with clear hinged cover
F Exhaust outlet – keep clear
B Wand retention clip
G Pressure gauge (select models)
C Vacuum exhaust. Keep clear.
H Pressure regulator (select models)
D Product label and serial number
I Pumpout coupling (select models). Keep capped when not in use.
E Dual cords (select models)
J Auto-Fill coupling (select models)
