SETUP FOR CARPET CLEANING
Attach
FAUCET MOUNTING KIT
to water supply and
drain
Use supplied
faucet adaptor kit
as necessary to fit coupler
to faucet.
Connect fresh water coupling to faucet.
Use
supplied
faucet adaptor kit
as necessary to fit coupler to faucet.
Connect fresh water coupling to supply hose.
For best cleaning results, use hot water.
Attach waste water hose to waste coupling.
Direct drain tube into drain.
Connect waste water drain hose to waste wa-
ter outlet.
Connect water supply to fresh water inlet.
Connect power cords
Sockets are located under the
bottom of the control panel. Rotate plug lock to secure plugs. Plug
each cord into a 15 amp circuit.
Separate Circuit Indicator light
will
glow green
when unit is properly connected to two separate 15 amp circuits.
Turn on water supply
and check for leaks.
Install cleaning solution bottles and
insert feed tubes
Place Step 1 Prespray
bottle into left pocket and insert Prespray
tube. Secure tube with cap.
Step 2/3 Rinse Extract
bottle into right pocket and insert Rinse Ex-
tract feed tube into bottle. Secure tube with cap.
NOTICE: This equipment is for use with VersaCarpet and
VersaGreen products only. Use with other products will reduce
cleaning performance and may damage the equipment and will
void the warranty.
Open tank lid, place one defoamer pellet in filter
cage. Replace lid and secure with clamps.
THE VC700 IS NOW READY FOR CARPET CLEANING USE.
Step 1
Prespray
Step 2/3 Rinse
Extract
Insert
feed
tubes as
shown.
Waste water
to drain.
Fresh water
to VC700
VISIT WWW.VERSACLEANSYSTEMS.COM
49-090B VC700-115V 2014-05
5
Legend Brands, Inc.
