CONTROLS
•
Prespray wand.
Squeeze lever to release solution. Wand is pressurized by water supply.
•
Control rotary head with left hand lever.
Grip handle firmly before squeezing lever.
•
Control solution flow with right hand lever.
Release handle to stop flow.
•
To manually pump out tank, press and hold pumpout switch to “Manual” position. Re-
lease switch to return to “Auto” mode.
Use manual pumpout if excessive foaming occurs and at the end of
the job to ensure tank is empty.
To use unit with hand tool or wand,
first remove cap from the accessory vacuum inlet
and
insert vacu-
um adapter tube
. Now attach tool to accessory vacuum inlet
and accessory water connect outlet
.
CLEANING PROCEDURES
CARPET
NORMAL SOILS
1. Prespray
with
VersaCarpet
Step 1
. See label for dwell time.
2. Rinse extract
with
VersaCarpet Step 2
.
3. Dry
with suitable airmovers to
ensure rapid drying.
CARPET
HEAVY SOILS
1. Prespray
with
VersaCarpet
Step 1 HD
. See label for dwell time.
2. Dry agitate.
Operate VC700
rotary head over carpet with
no solu-
tion or vacuum applied.
3. Rinse extract
with
VersaCarpet Step 3
4. Dry
with suitable airmovers to
ensure rapid drying.
UPHOLSTERY
1. Prespray
with
VersaCarpet
Step 1
. See label for dwell time.
2. Rinse extract
with
VersaCarpet Step 3
using hand tool
attached to VC700.
3. Dry
Place suitable airmovers to
ensure rapid drying.
READ CHEMICAL PRODUCT LABELS FOR DETAILED INSTRUCTIONS.
TRANSPORTATION AND STORAGE
NOTICE:
Handle the unit carefully. Do not drop, throw, or place the unit where it could fall. Rough treatment can damage
this equipment and may create a hazardous condition or void warranty.
•
When repositioning unit, tilt unit back to lift vacuum head 1 to 2 in. above floor to protect rotary head,
•
Store and transport securely to avoid any damaging impact to internal parts.
•
Secure during transport to prevent sliding and possible injury to vehicle occupants.
•
Protect from freezing.
VISIT WWW.VERSACLEANSYSTEMS.COM
49-090B VC700-115V 2014-05
6
Legend Brands, Inc.
