EVX-5400 O
pErating
M
anual
24
a
dvancEd
o
pEratIon
Press the [
P4
] key, then edit the “ID number” using the [
0
] - [
9
] key (for
select the number) and [
A
]/[
B
] key (for select the digit). Press the [
P4
] key
again, the display indicates “
-SAVED-
” briefly and store the new setting. You
may cancel the new setting by pressing the [
P3
] key.
ALT SEL
: You may change the alert tone which assigned to the selected Con-
tact Alias.
Press the [
P4
] key, then press the [
]/[
] keys (or [
P1
]/[
P2
] keys) to select
the desired alert tone. Available selections are “TONE A” to “TONE J” and
“NONE”. Press the [
P4
] key again to store the new setting. You may cancel
the new setting by pressing the [
P3
] key.
DEL LIST
: You may delete the desired Contact Alias from the contact list.
Important Note
: The deleted Contact Alias can not be restored, and you can
not delete the Contact Alias which determined by the CE142 Programming
Software.
Press the [
P4
] key, the display indicates “
DEL Y/N
”(“
Y
” is blinking). Press
the [
P4
] key again, the display indicates “
-SAVED-
” briefly, then reverts to
first contact number of the contact list. You may cancel the new setting by
pressing the [
P3
] key.
RADIO CK
: You may check the radio status of the selected Contact Alias.
Press the [
P4
] key to transmit the radio status command to the designated
radio. If the designated radio is alive, the designated radio transmits the ACK
command, and then your radio’s display indicates “
ACK RECV
”. If not, your
radio’s display indicates “
NO ACK
”.
RADIOMON
: You may monitor the situation around the designated radio by
remote control.
Press the [
P4
] key to remote-control the designated radio. If the designated
radio is alive, the designated radio will automatically transmit for the pro-
grammed period to transmit the situation around the radio to you. Your radio’s
display indicates “
ACK RECV
”, and outputs the situation around the desig-
nated radio from the speaker. If the designated radio is not alive, your radio’s
display indicates “
NO ACK
” and no responses.
REVIVE
: You may revive the stunned radio by remote control.
Press the [
P4
] key to transmit the revive command to the stunned radio. When
the stunned radio receives the revive command, the stunned radio revives, and
then transmits the ACK command automatically. Your radio’s display indi-
cates “
ACK RECV
”. If your radio’s display indicates “
NO ACK
”, the revive
command did not succeed.
