Incoming Call Pickup
103
SBX IP 320 Features & Operation Guide
Ex. 3
When there's an incoming CO Call through CO Lines 1-8 during Weekend mode, the
VMIB announcement played. If # is pressed, the line will be released.
1.
Check if CO Service type is set to Normal at PGM 140.
2.
Check if VMIB Announcement 01 is recorded properly at the System Attendant Station.
3.
At PGM 144, select CO Line range 01-08 and press FLEX 3 for Weekend Mode.
4.
Dial 3 for VMIB, and enter the VMIB Announcement Number 01.
5.
To make the CO Line release after VMIB announcement, press the # key.
6.
Save the changed setting by pressing the [HOLD/SAVE] button.
Condition
•
Any CO Line Ring Assignment can be programmed for multiple stations, or all stations.
And each ring to a station can be delayed by ADMIN programming. The ring assignment
is individually applied to ring modes Day, Night, weekend or On-demand. Every CO
Line must be assigned to an Attendant Station by default.
•
To receive incoming CO Line Calls, the DKTU should have a {CO} or {LOOP} button.
Admin Programming
•
CO Service Type (PGM 140 - FLEX 1)
•
CO Ring Assignment (PGM 144)
•
Weekly Time Table (PGM 233)
•
Hunt Group (PGM 190)
