Call Handling
35
SBX IP 320 Features & Operation Guide
Data Line Security
Once Data Line Security (PGM 111 - FLEX 4) is set on a Station, communication between the
Station and another party is protected from signals such as overriding and Camp-on to the
Station.
This status should primarily be used for modems and fax stations.
Conditions
•
If an analog extension (Data, Fax, Modem), assigned data line security, makes an external
call via ISDN line, 3.1KHz Setup message will be sent to an ISDN CO line instead of the
speech Setup message.
•
If a busy station which is assigned data line security, receives an incoming CO call, the
call is disconnected regardless of the DID/DISA Destination setting.
Admin Programming
•
Data Line Security (PGM 111 - FLEX 4)
Dialing Security
This feature allows you to prevent he dialed phone number from being displayed on the LCD
of the called station when calling with a speed dial number.
Operation
To program a speed dial number with security dialing:
Note:
Speed dial starting with * is operated with dialing security.
1.
Press the [TRANS/PGM] button.
2.
Press the [SPEED] button.
3.
Dial a speed dial bin number.
4.
Press the * button.
5.
Dial the desired speed number.
6.
Press the [HOLD/SAVE] button.
