Call Handling
55
SBX IP 320 Features & Operation Guide
Note:
If a voice message is recorded on a pulse-type SLT (PGM 110), the recorded message
will be played by dialing the message wait retrieval code (557). The played message will be
deleted automatically after being played. When more than one message is recorded, after the
first message, a warning tone will be heard to indicate remaining messages. To retrieve another
message, dial 557 again. The callback will ring with Tone mode regardless of intercom
signaling mode.
To queue a call back on a busy SLT:
1.
Hook-flash.
2.
Dial 556 while busy tone is heard.
3.
Confirmation tone sounds; replace the handset.
4.
When the SLT returns to an idle state, the intercom ring is received.
Conditions
•
A Station can leave only one callback or message; a new request will override the
previous one.
•
Message wait data will be protected with power failure.
•
When dialing the station number instead of pressing the [CALLBK] button to answer a
message wait, the message wait will be canceled in the calling station.
•
Message wait reminder tone is programmable from 00 to 60 min. If you don't want to
present the tone, the timer may be set to 00.
•
Message wait reminder tone is not heard at a busy station.
•
Message wait reminder tone will continue until all the messages are retrieved.
•
When a station attempts to leave a message at a station which has already 5 messages and
one of those is not equal to the attempting station, error tone will be heard. When VMIB
access is allowed in the station, after recording VMIB message, it turns to a normal
message in the station. In this case, an error tone will not be provided in the attempting
station.
