Conference
74
SBX IP 320 Features & Operation Guide
Conference
A station user (Supervisor) can make a call with intercom stations and CO Lines. A Supervisor
invites station users or CO Line users one by one with the [CONF] button. Connected users can
speak and hear with each other at the same time.
In a Multi-Line conference, up to 15 parities (intercom/CO Line) can enter a conference. Up to
14 CO lines can be used to converse with one intercom station.
An Unsupervised Conference is one that continues even though the conference initiator
(supervisor) exits the conference.
To establish an Add-on Conference:
1.
While on a call, press the [CONF] button; the existing call will be put on HOLD and the
intercom dial tone will be heard.
2.
Dial the digits to connect the second internal party.
3.
When the call is answered, press the [CONF] button.
4.
Repeat steps 1-3, until all parties are added to the conference.
5.
When all parties have been called, press the [CONF] button again; all parties will be
connected to the call.
To make a Multi-line Conference:
1.
While on a CO line call, press the [CONF] button; the existing call will be put on HOLD
and the intercom dial tone will be heard.
2.
Dial the digits to connect the second party.
3.
When the call is answered, press the [CONF] button.
4.
When all parties have been called, press the [CONF] button again; all parties will be
connected to the call.
To make Unsupervised Conference:
1.
During a conference, the supervisor presses the [CONF] button.
2.
The conference is still connected and the supervisor’s [CONF] button LED should flash.
3.
To re-enter the conference, the supervisor lifts the handset and presses the flashing
[CONF] button.
