Vertilux 1-700-DM-00064, Programming Instructions Manual

7

vertilux.com

© 2019. Vertilux, Ltd. All Rights Reserved. Last revised: February 2019.

The drapery will move in one direction until it reaches either end side of the track. The 

LED

indicator will flash 

BLUE

 3 times to indicate that the motor has automatically self adjusted the first 

limit. With the remote control, move the drapery to the opposite direction, the motor will self 

adjust the second limit when it reaches the other end side of the track.

Pairing the motor with the remote control

This function is convenient when the need arises to change the traversing direction. For example, 

when pressing the 

up button

 on the remote control, the drapery closes, or when pressing the 

down button

, the drapery opens.  

Checking the traversing direction

1.

Press and hold the 

programming button

 on the 

head of the motor for approximately 

1 s

 until the 

LED 

indicator on the motor starts flashing 

RED

.

2. 

Select the desired channel and press the 

up 

button

 for approximately 

2 s

. The 

LED

 indicator 

will flash 

BLUE

 3 times. The motor is now paired 

with the remote control. 

PROGRAMMING

BUTTON

UP

BUTTON

1.

Press and hold the 

stop button

 for about 

5 s

until the 

LED

 indicator on the motor starts 

flashing 

RED

. 

2. 

Release the 

stop button

, and press it again for 

about 

2 s

. The 

LED

 indicator will flash 

BLUE

3 times. The drapery has now changed its 

traversing direction.

STOP

BUTTON

STOP

BUTTON