System Application Guide
SAG582136800
Spec. No. 582136800 (Model 502
NGFB
)
Revision BA, April 8, 2020
Page 87 of 129
Lists 2, 3, 4, 7, 12, 14, 15 and 22 require three (3) AC Input Cable Assemblies or Line Cords.
Lists 6, 11 and 21 require five (5) AC Input Cable Assemblies or Line Cords.
Lists 8, 13 and 23 require six (6) AC Input Cable Assemblies or Line Cords.
Lists 16 and 26 require eight (8) AC Input Cable Assemblies or Line Cords.
Lists 17 and 27 require nine (9) AC Input Cable Assemblies or Line Cords.
AC Cord Bracket Kits (P/N 560161 and P/N 560162)
Features
♦
P/N 560161 consists of a bracket 559871 and hardware for mounting to the rear
of a 23" relay rack that will support the AC cables that plug into the molex
connectors, The customer will tie the AC cables to this bracket using lacing or
ty-raps.
♦
P/N 560162 consists of a bracket 559872 and hardware for mounting to the rear
of a 19" relay rack that will support the AC cables that plug into the molex
connectors, The customer will tie the AC cables to this bracket using lacing or ty-raps.
Restrictions
For use with List 1,2,3,4,10,11,12,13,14,15,16,17,21,23,26,27.
Ordering Notes
1)
Order mounting kit P/N 556161 or P/N 556162, as required.
Note: If a relay rack and power system are ordered along with the brackets, the brackets will be mounted to the rack at
the factory.
Battery Cables, P/N 559124
Features
♦
Provides two (2) 3’ long, 2 AWG, battery cables terminated in a 2-position Red SB120
Anderson connector. Remaining end terminated in lugs for connection to the distribution
unit.
Restrictions
For use with Lists AA, AB, AC, FA, FB and FC only.
Ordering Notes
2)
Order as required. Each shelf provides landings for up to three (3) battery strings.
Alarm Cables
Features
♦
Two sets of Alarm Cables are available, each set consisting of two pieces that plug together to make a complete set. One
set for the Digital Inputs and another set for the Relay Outputs. One half of each set connects in the shelf. The other half
of each set is unterminated on one end.
Ordering Notes
1)
For the Relay Outputs Alarm Cable, order both P/Ns 541308 (shelf side) and P/N 541309 (10’ customer side).
For the Digital Inputs Alarm Cable, order both P/Ns 541310 (shelf side) and P/N 541311 (10’ customer side).
The P/N 545644, which is the 50’ version of the P/N 541309, is also available.
A custom digital input cable and internal wiring kit is available, P/N 559963. This kit is factory installed only. (Provides -48
VDC pre-wired to the negative side of digital inputs #4 through #7 and a 10’ alarm cable factory wired to the positive side
of digital inputs #4 through #7.)
