SAG582136800
System Application Guide
Revision BA, April 8, 2020
Spec. No. 582136800 (Model 502
NGFB
)
Page 106 of 129
1.2.2
EMC and Safety:
Complies with the Low-Voltage Directive, 73/23/EEC.
SAFETY
EN 60950-1: 2001
Safety of Information Technology Equipment, including Electrical
Business Equipment
1.2.3
NEBS Compliance: Compliance verified by a Nationally Recognized Testing Laboratory (NRTL) per
GR-1089-CORE and GR-63-CORE. Contact Vertiv for NEBS compliance reports.
1.3
Standard Features
1.3.1
AC Input Connections: Refer to
and
1.3.2
1.3.3
Alarm and Monitoring Connections: Alarm output and monitoring input leads are connected to screw-type
terminal blocks located on the IB2 Interface Board located inside the shelf. These leads enter the right side (as
viewed from the front) of the shelf and are accessible from the front of the shelf. Alarm cables are available.
1.3.4
Dimensions and Weights: Refer to the illustrations under
1.4
IB2 (Controller Interface Board) Ratings
1.4.1
Digital Input Ratings
(A)
Maximum Voltage Rating: 60V DC.
(B)
Active High: > 19V DC.
(C)
Active Low: < 1V DC.
1.4.2
Relay Ratings
(A)
Steady State: 0.5 A @ 60V DC; 1.0 A @ 30V DC.
(B)
Peak: 3 A @ 30V DC.
2.
RECTIFIER
Refer to the Rectifier Instructions (UM1R482000e).
3.
CONTROLLER
Refer to the Controller Instructions (UM1M521BNA or UM1M820BNA or UM1M830BNA).
For controller factory settings, refer to the Controller Configuration Drawing (C-drawing).
