SAG582136800
System Application Guide
Revision BA, April 8, 2020
Spec. No. 582136800 (Model 502
NGFB
)
Page 24 of 129
♦
Includes AC input connectors.
♦
System houses up to four (4) Rectifier Modules, one (1) Controller, one (1) GMT Distribution Panel, and one (1)
Distribution Cabinet.
♦
Includes IB2 Interface Board.
Restrictions
One (1) field expansion shelf is allowed (List 14).
Ordering Notes
1)
Order List 20 as required. Also order the following as required.
2)
Order up to four (4) Rectifier Modules (P/N
) per system.
3)
Order one (1) optional Rectifier Module Mounting Position Blank Cover Panel (P/N PSK4830R-1) for each empty rectifier
module mounting position in the system if required.
4)
) Controller per system. Also specify appropriate configuration file for your site.
5)
Order one (1) Distribution Cabinet (List
) per system.
6)
Order one (1) GMT Panel (
) per system.
7)
Order Battery Trays (
) as required.
8)
Order Relay Rack Anchor Kit(s) (
) as required.
9)
Order up to two (2) Temperature Probes (
) as required. See “Optional Temperature Probes” on page 68 for
temperature probe options with a mounting tab.
10)
Order
section.
11)
Order
AC Input Cables and Line Cords
section.
12)
Order
section.
13)
Order output lugs per
section.
List 21: 19” Assembled System with One (1) Main Shelf, One (1) Expansion Shelf, and
Space for One (1) GMT Distribution Panel and One (1) Distribution Cabinet
Features
♦
Consists of two (2) 2RU high by 19” wide rectifier shelves, and interface for pre-assembled distribution.
♦
Includes AC input connectors.
♦
System houses up to nine (9) Rectifier Modules, one (1) Controller, one (1) GMT Distribution Panel, and one (1)
Distribution Cabinet.
♦
Includes IB2 Interface Board.
Restrictions
One field expansion shelf is allowed (List 14).
Ordering Notes
1)
Order List 21 as required. Also order the following as required.
2)
Order up to nine (9) Rectifier Modules (P/N
) per system.
3)
Order one (1) optional Rectifier Module Mounting Position Blank Cover Panel (P/N PSK4830R-1) for each empty rectifier
module mounting position in the system if required.
4)
) Controller per system. Also specify appropriate configuration file for your site.
5)
Order one (1) Distribution Cabinet (List
) per system.
6)
Order one (1) GMT Panel (
) per system.
7)
Order Battery Trays (
) as required.
8)
Order Relay Rack Anchor Kit(s) (
) as required.
9)
Order up to two (2) Temperature Probes (
) as required. See “Optional Temperature Probes” on page 68 for
temperature probe options with a mounting tab.
10)
Order
section.
11)
Order
AC Input Cables and Line Cords
section.
12)
Order
section.
