SAG582136800
System Application Guide
Revision BA, April 8, 2020
Spec. No. 582136800 (Model 502
NGFB
)
Page 70 of 129
TPS/TLS-Type Fuses
Features
♦
A single fuseholder provides for installation of a 3 to 100 ampere Bussmann TPS-type or Littelfuse TLS-type fuse.
♦
Fuseholder plugs into a single mounting position in the compatible Distribution Cabinets described in this document.
♦
Fuseholder provides a GMT-A alarm type fuse, which operates open to provide an alarm indication if the distribution fuse
opens.
Restrictions
Load should not exceed 80% of device rating.
Ordering Notes
1)
Order fuses per Table 8.
2)
Order one (1) Part No. 117201 TPS/TLS-type fuse holder for each fuse.
3)
For lug and wire size selection, refer to refer to
TPS/TLS-TYPE FUSES
Ampere
Rating
Part Number
Ampere
Rating
Part Number
3
248230900
40
248233300
5
248231000
50
248233900
6
248231200
60
248234200
10
248231500
70
248234500
15
248231800
80
118413
20
248232100
90
118414
25
248232400
100
118415
30
248232700
TPS/TLS-Type Fuseholder*
117201
* Fuseholders are not furnished and must be ordered as required. Order (1) Part No. 117201 for each fuse
position required. Fuseholder includes (1) alarm fuse (Bussmann GMT-A 18/100 amp; Vertiv 248610301) and
(1) alarm fuse safety cover (Vertiv P/N 248898700).
Unless otherwise specified, fuses are to be mounted from right to left starting with the highest capacity and
working to the lowest capacity.
Table 8
