System Application Guide
SAG582136800
Spec. No. 582136800 (Model 502
NGFB
)
Revision BA, April 8, 2020
Page 75 of 129
SM
TEMP Temperature Concentrator (P/N 547490)
Features
♦
Allows for multiple temperature probes to be used for temperature
compensation. Compensation can be based on highest probe temperature
or average probe temperature.
♦
In the ACU+ and NCU, allows for multiple temperature probes to be used
for ambient temperature monitoring, battery temperature monitoring,
temperature compensation, and/or BTRM (Battery Thermal Runaway
Management).
♦
Provides (8) temperature probe inputs per SM
TEMP.
♦
Can be cascaded up to (8) SM
TEMP modules, connecting up to sixty-four
(64) temperature probes.
♦
Provides analog output for all controllers. Provides CAN output for ACU+
and NCU. In the ACU+ and NCU, the SM Temp Concentrator can be connected at the end of the ACU+ or NCU CAN bus.
Via the CAN Bus, the ACU+ and NCU reads each temperature probe from each SM-Temp Concentrator.
Restrictions
Requires ACU+ version 3.02 or later when SM-Temp is connected into the ACU+ CAN bus.
Ordering Notes
1)
Order P/N 547490.
2)
Order up to (8) 3-meter (P/N 547749) or 10-meter (P/N 547750) temperature probes for each concentrator.
3)
Order one (1) 25' CAN bus cable (P/N 559932) to connect a List 1 through 8 shelf to the SM-Temp, as required.
