Chapter 4 Operator Control And Display Panel 65
Liebert EXM 80kVA ~ 200kVA UPS User Manual
Message 1
Message 2
Message 3
Definition
Load off
Energy saving
mode active
/
This system is in normal operating mode, load not
supplied by this unit, and has one of the energy
saving modes active
Load on inverter
Test mode active /
This system is in normal operating mode, for the
test mode that is activated
Table 4-2
Warning status messages
Message 1
Message 2
Message 3
Definition
LOAD ON
INVERTER
OUTPUT
OVERLOAD
—
This system is in warning operating mode,
supplied by the inverter, and the system is in
overload. This means the system will go off
inverter at some point
LOAD ON
INVERTER
ALARM
ACTIVE –
WARNING
VIEW ALARM
LOG FOR
DETAILS
This system is in warning operating mode,
supplied by the inverter, and has an active
warning. This means the system is operating,
but something was detected to be outside of
normal
LOAD ON
BYPASS
LOAD
MANUALLY
TRANSFERR
ED TO
BYPASS
LOAD
UNPROTEC
TED
This system is in warning operating mode,
supplied by the bypass. The user transferred the
load to the bypass so the system cannot protect
itself from source variations
LOAD ON
BATTERY
X
MIN
UTE
S
REM
AINI
NG
—
This system is in warning operating mode,
supplied by the inverter via the battery. There
are X minutes of calculated run time
remaining. This is used before the battery
low-voltage warnings are generated
LOAD ON
BYPASS
ALARM
ACTIVE –
WARNING
VIEW ALARM
LOG FOR
DETAILS
This system is in warning operating mode,
supplied by the bypass, and has an active
warning. This means the system is operating
after a transfer to bypass and something was
determined to be outside normal range
LOAD ON
INVERTER
ENERGY
SAVING
MODE
ACTIVE
ALARM
ACTIVE –
WARNING
This system is in warning operating mode,
supplied by the inverter, one of the energy
saving modes is active, and has an active
warning. This means the system is operating,
but something was determined to be outside
normal range
LOAD ON BYPAS
ENERGY
SAVING
MODE
ACTIVE
ALARM
ACTIVE –
WARNING
This system is in warning operating mode,
supplied by the bypass, one of the energy saving
modes is active, and has an active warning. This
means the system is operating, but something
was determined to be outside normal range
LOAD OFF
ENERGY
SAVING
MODE
ACTIVE
ALARM
ACTIVE –
WARNING
This system is in warning operating mode, load
off, one of the energy saving modes is active, and
has an active warning. This means the system is
operating, but something was determined to be
outside normal range
LOAD ON
INVERTER
TEST MODE
ACTIVE
ALARM
ACTIVE –
WARNING
This system is in warning operating mode,
supplied by the inverter, running in a system test
mode, and has an active warning. This means the
system is in TEST MODE, and something was
determined to be outside normal test operations
LOAD ON
BYPASS
TEST MODE
ACTIVE
ALARM
ACTIVE –
WARNING
This system is in warning operating mode,
supplied by the bypass, running in a system test
mode, and has an active warning. This means the
system is in TEST MODE, and something was
determined to be outside normal test operation
Summary of Contents for EXM 0080kTK16FN01000
Page 2: ......
Page 14: ......
Page 132: ...118 Chapter 8 Options Liebert EXM 80kVA 200kVA UPS User Manual...