Figure 3.3 External battery cabinets connected to GXT4
NO.
DESCRIPTION
1
GXT4
2
External battery cabinet (EBC)
3
Cable connects EBC to GXT4.
To install the external battery cabinet(s):
1. Inspect the EBC for freight damage. Report damage to the carrier and your local dealer or
Vertiv™ representative.
2. Optional rack-mount hardware is shipped with the external battery cabinet and may be
installed at this time.
•
Securing hardware and slide rails are sold separately. Please contact your local dealer or
Vertiv™ representative for these additional options and any assistance needed. Fasten
the slides into position with the screws per the instructions included with the slide rails.
3. Use the enclosed support bases for the tower option to prevent tip-over. One additional set of
support-base extensions ships with each EBC.
4. Verify the that the EBC breaker is in the "Off" position.
5. Connect the supplied EBC cable to the rear of the cabinet, then to the rear of the UPS.
6. Turn the EBC breaker to the "On" position.
7. Verify the circuit breaker on the EBC is in the "On" position.
8. Use the included configuration program or the LCD display to program the UPS with the
number of external battery cabinets connected. Instructions for the configuration program are
in
Configuration Program
on page 44.
The UPS is now equipped with additional back-up battery run time. For approximate battery run times,
refer to Table 9.4 on page 59.
Vertiv
| Liebert GXT4 Installer/User Guide |
24
Summary of Contents for GXT4-10000RT230
