Figure 3.5 Removing Shipping Brackets from Pallet
Item
Description
Item
Description
1
Front shipping bracket
3
Left shipping bracket
2
Front holding bracket
4. Place two ramps on the pallet by fitting the tabs into the holes on the pallet.
Figure 3.6 Installing Ramps
5.
Lift the four leveling feet under the unit. Lift the unit one corner at a time.
a. Use an adjustable wrench to loosen the fixing nut on each foot in counter-clockwise direction.
b. Use an adjustable wrench to turn the hex bolt clockwise to adjust feet up.
3 Pre-installation Preparation
18
Vertiv™ Liebert® CRV CRC30 and CRC60 Chilled Water Cooling System User Manual