3.3 Clearance Requirements
Figure 3.2 Vertiv™ Liebert® CRV CRD25 Clearance Requirements (Top View) (Unit mm (in.))
Figure 3.3 Vertiv™ Liebert® CRV CRD35 Clearance Requirements (Top View) (Unit mm (in.))
NOTE: Keep at least 915 mm (36 in.) from the front door and rear door to the wall or to other obstacles for service
clearance.
3.4 Inspecting the Unit
Upon arrival of the unit and before unpacking:
•
Verify that the labeled equipment matches the bill of lading.
•
Inspect that there are no visible or concealed damages on the package.
•
Check that the tilt monitor indicator on the package is not red. If it becomes red, tipping has occurred.
3 Pre-installation Preparation
13
Vertiv™ Liebert® CRV CRD25 and CRD35 Row-Based Cooling System User Manual
