25
22: Charger voltage adjustment
Interface
Setting
Parameter 2:
The voltage range is from -9.9V to 9.9V, the
default value is 0V.
NOTE:
*Before making voltage adjustment, be sure to disconnect all
batteries first to get the accurate charger voltage.
* We strongly suggest using the default value (0). Any
modification should be suitable to battery specifications.
23: L1 inverter voltage adjustment
Interface
Setting
Parameter 2:
The voltage range is from -9.9V to 9.9V, the
default value is 0V.
24: L2 inverter voltage adjustment
Interface
Setting
Parameter 2:
The voltage range is from -9.9V to 9.9V, the
default value is 0V.
25: L3 inverter voltage adjustment
Interface
Setting
Parameter 2:
The voltage range is from -9.9V to 9.9V, the
default value is 0V.