background image

To contact Vertiv Technical Support: visit www.Vertiv.com

© 2019 Vertiv Group Corp. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Group Corp. All other names and logos referred to are 

trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Group 

Corp. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change 

without notice.

  

SL-70529_REV0_11-19

Summary of Contents for Liebert GXT5-10KHVRT5UXLN

Page 1: ...l at microups warranty vertiv com 2 Choosing a location Install the UPS in a temperature controlled environment that is free of corrosive and conductive contaminants Avoid locations near heat or water sources and exposed to direct sunlight REAR PANEL OF GXT5 8000 10KHVRT5UXLN GXT5 UPS Description 1 Liebert IntelliSlot Port 2 Terminal block Dry contact communication connectors 3 RS 485 port 4 USB p...

Page 2: ...nal External battery cabinets EBC provide longer battery run time for connected devices Refer to GXT5 User Guide to select the appropriate model and quantity for your GXT5 model and applications Verify that the EBC breaker is in the Off position Connect one end of the supplied EBC cable to the UPS battery connector and autodetect port terminal block 3 and one end to the EBC s battery connector and...

Page 3: ... Ensure that the REPO connector on the rear of the unit has a jumper between pins 1 2 or that it is properly wired to an Emergency Power Off circuit normally closed 3 Make sure the breaker supplying power to the UPS is closed and close the input breaker and bypass breaker on the rear of the UPS 4 If necessary use the LCD display or a connected computer to adjust any required settings Refer to the ...

Page 4: ...d logos referred to are trade names trademarks or registered trademarks of their respective owners While every precaution has been taken to ensure accuracy and completeness herein Vertiv Group Corp assumes no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions Specifications are subject to change without notice 4 SL 70529_REV...

Reviews: