4 EQUIPMENT INSPECTION AND HANDLING
WARNING! Risk of improper moving, lifting, or handling of the unit. Can cause equipment damage, injury or
death. Read all of the following instructions and verify that all lifting and moving equipment is rated for the
weight of the unit before attempting to move, lift, remove packaging from or prepare the unit for installation.
See Table 3.2 on page 12, for weights.
CAUTION: Risk of contact with sharp edges, splinters, and exposed fasteners. Can cause injury. Only
properly trained and qualified personnel wearing appropriate, OSHA approved PPE should attempt to move,
lift, remove packaging from or prepare the unit for installation.
NOTICE
Risk of improper lifting. Can cause equipment damage. Make sure that the spreader bars are wider than the
unit. If the spreader bars are too short, the slings may crush the unit.
NOTICE
Risk of damage from forklift. Can cause unit damage. Keep tines of the forklift level and at a height suitable to
fit below the skid and/or unit to prevent exterior and/or underside damage.
Upon arrival of the unit and before unpacking:
•
Verify that the labeled equipment matches the bill of lading.
•
Carefully inspect all items for visible or concealed damage.
•
Report damage immediately to the carrier and file a damage claim with a copy sent to Vertiv or to your sales
representative.
•
If you have the seismic mounting kit, refer to
Optional Configuration for Liebert® MC Seismic Application or
Equipment Recommended for Handling the Unit:
•
Forklift
•
Lift beam
•
Slings
•
Spreader bars
•
Crane
4.1 Packaging Material
All material used to package this unit is recyclable. Please save for future use or dispose of the material appropriately.
4.2 Unit Storage
Store the condenser in the original packaging in an area protected from excessive dirt, debris and contact damage until
final installation.
4 Equipment Inspection and Handling
15
Summary of Contents for Liebert MC series
