52 Chapter 3 Web Page Of RDU-A G2
RDU-A G2 Intelligent Monitoring Unit User Manual
Network Setting
1. IP Setting
Click the
Network Setting
submenu under the
System Options
menu, the page shown in Figure 3-64 pops up.
Figure 3-64 IP setting
The RDU-A G2 supplies two IP setting methods: DHCP auto addressing and manual static addressing, meanwhile, it
supports DNS.
On the page shown in Figure 3-64, you can configure the network parameters, such as IP addressing mode,
IP
,
Mask
,
Default Gateway
,
DNS1
(Preferred DNS server) and
DNS2
(Alternate DNS server). After modifying the
network parameters, click the
Save
button to make the setting effective.
Note
1. If network card 1 and network card 2 both use Static IP, the DNS address cannot be automatically obtained.
2. After modifying the IP address, you must use the new IP address to re-login the RDU-A G2. The system will jump to the IP
address of network card 1 by default.
2. Access Management
Click the
Network Setting
submenu under the
System Options
menu, and then click the
Access Management
tab,
the page shown in Figure 3-65 pops up.
Figure 3-65 Access management
