TIGHTENING
TORQUE
MPH2™ RACK PDU INPUT CURRENT
RATING
≤32 A
>32 A
Minimum
0.6 Nm (5.3 lb-in.)
1.5 Nm (13.3 lb-in.)
Maximum
0.8 Nm (7.1 lb-in.)
1.8 Nm (15.9 lb-in.)
Table 3.2
Terminal tightening torque
3.2 Tool-less Mounting
For tool-less mounting, attach the mounts to the rear of the MPH2™ Rack PDU, then hang it in the rack as
shown in the following figure. Tighten the screw attaching the mounting button to 17.7 lb-in. (2 Nm).
NOTE: Tool-less mounting brackets are not supplied. A range of brackets for Vertiv™ and other
manufacturers’ racks are available as accessories.
Figure 3.4 Tool-less mounting
NUMBER
DESCRIPTION
1
Torx screw
2
Button mount
3
Insert button mount into keyhole slot.
3.3 Installing a MPH2™ Rack PDU in a Vertiv™
®
Rack
3.3.1 Mounting Hardware and Tools Required
Factory-supplied
•
2 mounting brackets
•
2 mounting buttons
•
4 spring nuts
Vertiv
| Vertiv™ MPH2 Rack PDU Installer/User Guide
16
Summary of Contents for MPH2
