Installation 3
VES, LLC
eView Installation Manual VF3510-00, Revision E01.06
13 of 16
Connecting to the eView
The eView provides connections for RS485 communication and 24 VDC power.
To provide these connections on the eView:
Figure 3-4 below illustrates eView terminal connections on the Control Unit Board:
Figure 3-1
Device Connections
1
Remove four screws from the front-panel of the eView.
2
Remove the rear cover.
3
Connect RS485 communication to the terminals of COMM1.
4
Connect 24 VDC power to terminals of 0V and +24V.
Key
Name
Description
1
COMM1
Input terminals for RS485 serial bus communication.
2
0V
Negative power terminal ( - ) for 24 VDC return.
3
+24V
Positive power terminal (+) for 24 VDC.
K6017 ISS.04
SERIAL NUMBER
COMMS
ACTIVE
FIT JUMPER
FOR END OF LINE
COMM1
COMM2
ADDRESS
RESET
S1
PF
COMM2
COMM1
+24V
0V
RESET W/DOG
S579US -113290-40
1
2
3
4
ON
KS
1
2
3
- + - +
- + - +
