-Adjust the distance if necessary by bending the
side electrode very carefully. In case of anomaly
(as described before) replace the spark plug with
another of the recommended type;
- Fit the spark plug with the correct inclination and
manually screw it all the way down, then use the
special spanner to tighten it.
- Insert the cap onto the spark plug and proceed
with the reassembly operations.
CAUTION
THE SPARK PLUG MUST BE REMOVED WHEN
THE MOTOR IS COLD.THE SPARK PLUG
MUST BE REPLACED EVERY 20,000 KM. THE
USE OF NON CONFORMING ELECTRONIC IG-
NITION CONTROL UNITS OR SPARK PLUGS
OTHER THAN THOSE PRESCRIBED CAN SE-
RIOUSLY DAMAGE THE ENGINE.
Characteristic
Electrode gap
0.7-0.8 mm
Electric characteristic
Spark plug
CHAMPION RG4 PHP
Locking torques (N*m)
Spark plug
12 ÷ 14
Hub oil
Check
- Park the vehicle on its centre stand on flat
ground;
- Remove the oil dipstick «
A
», dry it with a clean
cloth and put it back into its hole
tightening it
completely
;
Remove the dipstick and check that the oil level is
slightly over the second notch starting from the
lower end; if the level is under the MAX. mark, it
needs to be filled with the right amount of hub oil.
Maintenance
Vespa GTV 250 i.e.
MAIN - 6
Summary of Contents for 633844 IT
