24
2.8
Frame, Suspensions, Brakes and Tires
2.8.1
Frame and Suspension
Characteristics
Descriptions
Type
Pressed steel, mono-coque type
Front suspension
Single-arm suspension equipped with dual-effect
hydraulic shock absorber with coaxial spring
Front shock absorber travel
3.4 in (
86.5 mm
)
Rear suspension
Engine mounted on oscillating fork pivoted to the
frame by means of an arm with 2 degrees of
freedom. Pair of dual effect hydraulic shock
absorbers and coaxial springs with 3 preload
adjustment positions
Rear shock absorber travel
3.52 in (
89.5 mm
)
2.8.2
Brakes
Characteristics
Descriptions
Front
Ø 8.66 in (
220 mm
) disc and hydraulically
operated floating caliper (via RH lever) with two
Ø 0.98 in (
25 mm
) pistons
Rear
Ø 8.66 in (
220 mm
) disc and hydraulically
operated floating caliper (via LH lever) with two
Ø 1.18 in (
30 mm
) pistons
2.8.3
Wheels and Tires
Characteristics
Descriptions
Aluminum alloy rims
Front:
3.00
×
12”
Rear:
3.00
×
12”
Tires
Front:
120/70-12” Tubeless
Rear:
130/70-12” Tubeless
Tire pressure (when cold):
Front:
26.1 psi (
1.8 bars
)
Rear (rider only):
29.0 psi (
2.0 bars
)
Rear (rider + passenger): 31.9 psi (
2.2 bars
)
Note:
The tire inflation pressure should be checked and adjusted when the tires are at
ambient temperature. Pressure should be adjusted according to the weight of the driver,
accessories, and/or passenger.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...
