67
7.10
Headlight Adjustment
-
Place the unloaded vehicle on a flat
surface, 32.8 ft (
10 m
) from a half lit white
screen, with the tires inflated to the
prescribed pressure. Ensure that the axis
of the vehicle is perpendicular to the
screen.
-
Trace a horizontal line on the screen 27.2-
28.3 in (
67-70 cm
) above ground.
-
Remove the steering cover by loosening
the screw shown in the figure.
-
Switch on the headlight, turn on the low
beam and check that the horizontal line,
which separates the lighted area from the
dark area, is not above the line previously
drawn on the screen. To shift the
headlight, operate on the adjusting screw
immediately below the headlight, as shown
in the figure.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...
