CAUTION
TO USE THE "INFLATE AND REPAIR" SPRAY CAN PROPERLY, FOLLOW THE
INSTRUCTIONS ON THE PACKAGING.
WARNING
THE WHEELS FITTED WITH TYRES SHOULD ALWAYS BE BALANCED. RIDING
THE VEHICLE WITH VERY LOW TYRE PRESSURE OR WITH INCORRECTLY
BALANCED TYRES CAN LEAD TO DANGEROUS STEERING VIBRATIONS.
03_40
delveicolo (03_40)
We recommend carrying out the following operations:
1.
General cleaning of the vehicle.
2.
With the engine off and the piston at the bottom dead centre position,
remove the
spark plug
, and pour 1-2 cm³ of recommended oil through its hole. Press the engine
start pedal 3 or 4 times letting the engine perform a few revolutions slowly, then replace
the spark plug.
3.
Drain up all the vehicle fuel; spread antirust grease on the uncoated metal parts;
keep the wheels off the ground, by resting the chassis on two wooden wedges.
4.
For the battery, follow the procedures described in the «Battery» section.
5.
Drain the petrol from the carburettor float chamber through the bleed cap.
Recommended products
eni i-Ride PG 5W-40
Synthetic based lubricant for high-performance four-stroke engines.
53
3 Maintenance
Summary of Contents for S 50 2T 2012
