background image

Vesper Marine declares that this product is in compliance with the essential 

requirements and other provisions of the R&TTE directive 1999/5/EC. 

For details and a copy of the Declaration of Conformity see 

www.vespermarine.com/compliance

This product is for use worldwide, including the following countries:

AT

BE

BG

CH

CY

CZ

DE

DK

EE

ES

FI

FR

GR

HU

IE

IS

IT

LT

LU

LV

MT

NO

NL

PL

PT

RO

SE

SI

SK

UK

Electronic Waste 
Recycling

Various regional and national 

regulations exist regarding the 

recycling of certain electronics.

Please consult your local  

authorities or contact Vesper  

Marine for recycling information.

 

This device is also approved for use in the United States, Canada,  

Australia and New Zealand. 

 

WARRANTY

Your Vesper Marine AIS transponder is warranted, when properly installed and used, to be free from defects in 

materials or workmanship for two years, from the date the product was purchased by the first retail customer. 

This warranty applies to the original retail purchaser only and is not transferable. This warranty only applies 

to products purchased from Vesper Marine or from an authorized Vesper Marine reseller. Within this period, 

Vesper Marine will, at its sole option, repair or replace any components which fail in normal use. Repairs or 

replacement will be made at no charge for parts or labor, provided that the customer shall be responsible 

for any transportation costs. This warranty does not cover failures due to abuse, misuse, accident, improper 

installation, unauthorized alterations or repairs, shipping damage, wear and tear, or corrosion.

This warranty will not apply if the product’s external housing has been opened, the serial number or other 

labels have been removed or altered, or the specified input voltage has been exceeded. This warranty will 

not apply if the product has been operated with an incompatible GPS antenna or without a suitable VHF 

antenna, where applicable to the product.

Vesper Marine retains the exclusive right to repair or replace the unit at its sole discretion. In the event Vesper 

Marine chooses to replace the unit it may be replaced with a factory reconditioned unit or a new unit at its 

sole discretion. Where a replacement is provided the original product becomes the property of Vesper Marine 

and the warranty will remain from the original purchase date.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,  

WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES 

YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.

IN NO EVENT SHALL VESPER MARINE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL 

DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN 

THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 

SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

Vesper Marine retains the exclusive right to repair or replace the product or offer a full refund of the purchase 

price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY.

*These warranty terms and conditions are provided as a summary and the specific terms and conditions of 

your warranty may vary by region. Please see www.vespermarine.com/vision for details of the warranty terms 

and conditions specific to your region.

Summary of Contents for WatchMate Vision

















Reviews: