The tool insert can jam and lead to loss of control over the
power tool.
▶
Before any work on the machine (e. g., mainte-
nance, tool change, etc.) as well as during transport
and storage, set the rotational direction switch to the
center position.
Unintentional actuation of the switch can
lead to injuries.
▶
Protect the battery against heat, e.g.,
against continuous intense sunlight, fire,
water, and moisture.
Failure to do so may result in an
explosion.
▶
In case of damage and improper use of the battery,
vapours may be emitted.
Ventilate the area and seek
medical help in case of complaints. The vapours can irritate the
respiratory system.
▶
This product contains a lithium battery.
A lithium
battery reaches its end of life after many years of use. To protect
the environment, follow the treaties for ecological protection of
local governments of your country to properly dispose of this
battery.
Lithium-ion batteries are recyclable
INTENDED USE
The 220USB is used for tightening and loosening screws. The
220USB is an electric screwdriver that can be charged by
connecting a USB charging cable.
FEATURES
・
Quick tightening can be performed efficiently with the aid of
an electric motor. The final tightening is automatically switched
to manual operation.
・
The high-intensity LED light brightens the blade edge even in
dark places.
・
The switch is a slide switch that can be operated forward and
backward with light force.
・
Small and light with USB rechargeable Li-ion battery.
・
Various commercially available bits of 6.35 mm(1/4inch)
are available.
1. Screwdriver handle
2. Driver bit holder
3. Sleeve
4. Switch
5. LED light
6. Charging lamp
7. Charging port
8. Screwdriver bit
TECHNICAL SPECIFICATIONS
- Rated voltage
3.6 V DC
- Capacity
800 mAh
No-load speed
1200 min
-1
Torque
- Electric power (Max.) 0.4 N
･
m(3.5lbf-in)
- Hand operation (Max.) 10 N
･
m(88.5lbf-in)
Weight (not including accessories)
160 g
REPLACEABLE PARTS
- END CAP - ALUMINIUM RING
6
NOISE/VIBRATION INFORMATION
Sound emission values determined according to EN 62841.
Typically the A-weighted sound pressure level of the product is
52.9 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 70 dB(A). Wear
hearing protection!
Screwdriving without impact: ah<0.276 m/s², K=1.5 m/s²
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure. The
declared vibration emission level represents the main applica-
tions of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
work patterns.
PACKAGE CONTENTS
1 Power tool(Hi-Speed)
1 Bit
1 USB Charging cable(1m)
1 Instruction manual
NAME OF PARTS
3
5
2
4
6
7
1
8
Permitted ambient temperature
- during charging 0
ﾟ
C(32
ﾟF
) - 40
ﾟ
C(104
ﾟF
)
- operating* and storaging 0
ﾟ
C (32
ﾟF
) - 45
ﾟ
C(113
ﾟF
)
Battery Li-Ion
Number of battery cells
1
Charging time
Approx. 60 min
Number of charges**
Approx. 500 charges
Charging port
micro USBType-B
Noise
63.9 dB
according to EN 62841-1 Annex I
Vibration values
0.276 m/s
2
according to EN 62841-1 Annex I, EN 62841-2
Input power (maximum) - Volt
5 V DC
-Current
1 A
* limited performance at temperatures <0 °C
(32
ﾟF
)
**Actual battery life will vary depending on specifications.
- Specifications and sizes are subject to change without notice.
Summary of Contents for 20USB-S1F
Page 2: ......
