The tool insert can jam and lead to loss of control over
the power tool.
▶
Before any work on the machine (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rotation-
al direction switch to the center position.
Unin-
tentional actuation of the switch can lead to injuries.
▶
Protect the battery against heat, e.g.,
against continuous intense sunlight, fire,
water, and moisture.
Failure to do so may result in
an explosion.
▶
In case of damage and improper use of the
battery, vapours may be emitted.
Ventilate the
area and seek medical help in case of complaints. The
vapours can irritate the respiratory system.
▶
This product contains a lithium battery.
A lithium battery reaches its end of life after many
years of use. To protect the environment, follow the
treaties for ecological protection of local governments
of your country to properly dispose of this battery.
Lithium-ion batteries are recyclable
PACKAGE CONTENTS
1 Power tool
1 Bit
1 USB Charging cable(1m)
1 Instruction manual
NAME OF PARTS
INTENDED USE
The 220USB is used for tightening and loosening
screws. The 220USB is an electric screwdriver that
can be charged by connecting a USB charging cable.
FEATURES
・
Quick tightening can be performed efficiently with
the aid of an electric motor. The final tightening is
automatically switched to manual operation.
・
The high-intensity LED light brightens the blade
edge even in dark places.
・
The switch is a slide switch that can be operated
forward and backward with light force.
・
Small and light with USB rechargeable Li-ion battery.
・
Various commercially available bits of 6.35 mm are
available.
1. Screwdriver handle
2. Driver bit holder
3. Sleeve
4. Switch
5. LED light
6. Charging lamp
7. Charging port
8. Screwdriver bit
3
5
2
4
6
7
1
8
TECHNICAL SPECIFICATIONS
- Rated voltage
3.6 V DC
- Capacity
800 mAh
No-load speed
280 min
-1
Torque
- Electric power (Max.)
2 N
･
m
- Hand operation (Max.)
10 N
･
m
Weight (not including accessories) 160 g
Permitted ambient temperature
- during charging
0
ﾟ
C - 40
ﾟ
C
- operating* and storaging
0
ﾟ
C - 45
ﾟ
C
Battery Li-Ion
Number of battery cells
1
Charging time
Approx. 60 min
Number of charges**
Approx. 500 charges
Charging port
micro USBType-B
Noise
66.1 dB
according to EN 62841-1 Annex I
Vibration values
0.421 m/s
2
according to EN 62841-1 Annex I, EN 62841-2
Input power (maximum) - Volt
5 V
-Current
1 A
* limited performance at temperatures <0 °C
**Actual battery life will vary depending on specifications.
- Specifications and sizes are subject to change without notice.
REPLACEABLE PARTS
- END CAP - ALUMINIUM RING
4
